[Zurück]


Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag):

J. Kellner, H. Schweinzer:
"Piezoceramic Ultrasonic Transducer with Frequency Controlled Radiation Pattern";
Vortrag: IEEE Instrumentation & Measurement Technology Conference, Warsaw, Poland; 01.05.2007 - 03.05.2007; in: "2007 IEEE Instrumentation and Measurement Technology Conference Proceedings", 07CH37834C (2007), ISSN: 1091-5281; 6 S.



Kurzfassung englisch:
A theoretical approach shows, that controllable aperture angles of the radiation pattern of an ultrasonic transducer can be realized by arranging interleaved piezoceramic hollow cylinders with different resonance frequencies to an annular array, where all array elements can be driven in parallel. With a controllable radiation pattern, measurements of position-angles of reflecting objects are possible. The requirements to realize such a transducer are that the piezoelectric maerial, the cylinders are made of, do have an appropriate high mechanical quality factor #Qm to get narrow resonance curves of the single cylinders and length dependent resonance frequenciesof the cylinders (in the length extensional mode) that are different in scuh an extent, that allows a clearly separation of the single resonance curves. Our new method is presented by designing a cylindrical transducer consisting of four interleaed piezoceramic cylinders with resonance frequencies 55kHz, 65kHz, 75kHz and 85kHz. the reflected signals are detected by a receiver microphone installed in the center of the transducer. The transducer has an aperture angle of the radiated main lobe, that can be varied stepwise in the range of

Erstellt aus der Publikationsdatenbank der Technischen Universität Wien.